Wetsuit Roofing and Waterproofing Information

Wetsuit has been specifically designed and developed to solve the most common problems associated with conventional membrane and sealing systems.

Most existing membranes require joint details or laps and mechanical or chemical fastening techniques, which generally can be attributed to the membrane’s failure. The Wetsuit system is a monolithic membrane that has no seams and fully bonds to most substrates. It requires no joints, seams or fastening which eliminates the possibility of problems occurring in these areas.

Special Features of the Wetsuit System

• Wetsuit elasticity and flexibility allow for some movement of the underlying substrate. It is spray applied as a continuous, monolithic and seamless membrane.
• It is cold applied and does not require any potentially dangerous torches or kettles as required with conventional membranes.
• Fills bridges up to ½” seams.
• Safe for personnel and applicators
• Cures 80% almost instantly
• Solvent free and does not emit any Volatile Organic Compounds (VOC’s)
• Tolerates some moisture on the surface to be coated
• Enables uniform high build
• Resistant to a wide range of chemicals
• Class “A” Fire Rating
• Cost-effective by cutting down on installation costs.
• Weight @ 60 mils thickness is 4 ounces per square foot
• Atmospheric application temperatures: 35 F to 110F
• 0.8 Reflectance and 0.9 Emittance
• 10/5 Limited Warranty included

Solving Today’s Environmental Problems

WETSUIT™

	All water-based rubber product
	Non-toxic and no harmful odors or fumes
	100% solids: No solvents
	Very high tear and tensile strength
	UV stable
	No VOC’s
	Class A self-extinguishing fire rating
	Low-pressure airless spray applied
	Can be cold spray applied at ambient temperatures as low as 35 degrees F
	Single coat application
	Totally seamless and monolithic system
	1500% elongation
	Unaffected by humidity
	Substrate can be damp (not saturated or ponding water)
	Minimal surface preparation
	Rain immediately after application will not damage WetSuit
	High reflectivity available
	Any mil thickness in a single coat
	Instant and adjustable initial cure at any mil thickness
	Material cure time may be adjusted during application to suit conditions
	May be sprayed vertically and overhead without sag
	Can be used as a traffic bearing surface

Links for demonstration and technical information:

wetsuit system

	Click Here to see a PowerPoint presentation on the Wetsuit System
Don't have PowerPoint?  Click here to download a free PowerPoint viewer